jjTT030

Back to: hardware2 Replies

home / Forums / hardware / jjTT030

  • This topic has 2 replies, 1 voice, and was last updated 1 month ago by jeff.
  • Author
    Posts
  • jeff
    2023-10-14 at 10:15 pm #5285

    Atari TT 030 TOS 3.06

    Super Boot software options:
    For 19″ monitor: F7, TTMedNeo (Geneva, NeoDesk 4)

    Working software:
    Neodesk 4 R005 (SN:Lorne G. Budnick/#000014090)
    Geneva R006 (SN:Lorne Budnick/#000000621)
    Calamus SL 21.07.95 (SN:300613)
    Diamond Back 3.60 (SN:Lorne Budnick/K16399)
    Diamond Edge 2.04 (SN:Lorne Budnick/T20437)
    Invision Elite 2.00 (SN:10001262)
    Superbase Personal 2 3.01 (SN:Lorne G. Budnick/Personal/30320308)
    Superbase Professional 3.02 (SN:Lorne Budnick/Personal/30030444)

    CodeKeys 1.3
    MaxiFile 3.06
    PopIt!
    CompoScript 1.04
    TouchUp 2.52
    TruePaint 1.01
    Wordflai II 1.11
    Word Writer 2.0
    Migraph OCR 1.3
    Flash 2 2.23 (SN:Lorne Budnick/00897)
    IdeaList 3.80
    Lattice C 5.60

    Pha$ar
    HD Driver 7.04
    HD Driver 6.0
    Imagecopy 4

    LDWPower (Runs, cursor disappears, can’t interact with program)

    jeff
    2025-03-21 at 10:50 pm #5346

    Didn’t test the individual programs, but the TT boots up on the 19 with the F7 option as above. Need to find out more about the upgraded graphics card in there and how to use it.

    jeff
    2025-05-14 at 7:24 pm #5353

    As of 20250514, the 19 inch monitor does not seem to be responding. Need to check the machine to another output.

  • Author
    Posts
  • You must be logged in to reply to this topic.